Lasiprofi Autotransport-Zurrgurt mit Controller und Wirbelhaken Pkw und Lkw

Quantity

Minimum Qty: 1 Piece

Shipping costs: €6.90 Excl. Tax ²

Free shipping from €150.00 (net) , €178.50 (gross)^*

Delivery time: approx. 1-3 working days

The Lasiprofi car transport strap ensures reliable and secure fastening of passenger cars and trucks on transporters, even during emergency maneuvers. Thanks to the integrated controller, the webbing does not rest directly on the tire, which guarantees an even distribution of pre-tensioning forces and prevents slipping. This protects the tires, the strap, and the vehicle floor panel from unnecessary wear. All systems comply with the latest standards such as DIN EN 12195-2 and VDI guideline 2700 parts 8.0–8.2 (September 2024) as well as the required ETA value ≥ 0.5. For passenger cars, the specifications include a strap width of 35 mm, LC 1,500 daN and STF 330 daN, while for trucks a strap width of 50 mm, LC 2,500 daN and STF 500 daN applies – each with a maximum elongation of 4%.

More Information

Ability to supply

approx. 1-3 working days

Color

red/green

Packaging unit

Stk.

Material

Polyester (PES)

End fitting

Swivel hook

Type of lashing strap

2-teilig

Intended purpose

Mehrweg

Vorteile des Produkts

Maximale Sicherheit
Fahrzeuge bleiben auch bei starken Bremsungen oder Ausweichmanövern zuverlässig fixiert.
Schonung von Reifen und Gurten
Durch den Controller kommt das Gurtband nicht in direkten Kontakt mit dem Reifen, die Vorspannkräfte werden gleichmäßig verteilt – Abrutschen ausgeschlossen.
Norm- und Rechtskonformität nach neuesten Standards
Der Gurt erfüllt die aktuelle DIN EN 12195-2, die VDI-Richtlinie 2700 Bl. 8.0–8.2 (Stand 09/2024) sowie den geforderten ETA-Wert ≥ 0,5. Damit sind Sie auch bei Prüfungen durch Polizei oder BAG rechtlich auf der sicheren Seite.
Einfache Handhabung & Zeitersparnis
Dank flacher, kompakter Bauweise ist das Auflegen besonders einfach. Zudem muss durch die geringe Dehnung des Gurtbandes deutlich weniger nachgespannt werden.
Hohe Langlebigkeit
Die spezielle Konstruktion reduziert Belastungen auf Reifen, Gurt und Bodenblech. Das System bleibt formstabil und zuverlässig – auch bei häufigem Einsatz.

Description

Anyone transporting vehicles on transporters or trailers needs a reliable load securing system. A car transport strap is the key tool to keep passenger cars and commercial vehicles securely in place, even during hard braking or sudden evasive maneuvers. Modern solutions such as the Lasiprofi car lashing strap not only make vehicle loading easier but also significantly safer, while fully complying with all current standards and regulations.

Since the revision of the VDI guideline 2700 parts 8.0, 8.1 and 8.2 in September 2024, every lashing strap used for vehicle transport must be equipped with a controller. This prevents the webbing from coming into direct contact with the tire and ensures that the pre-tensioning forces are evenly distributed on both sides. The strap is reliably prevented from slipping while both the tires and the strap itself are protected. In combination with DIN EN 12195-2, which defines the technical requirements for fiber-based lashing straps, and compliance with an ETA value of at least 0.5, car transport straps with controllers provide maximum safety and full legal security in professional road transport.

For passenger cars, the standards specify a strap width of at least 35 millimeters, a standard tension force (STF) of 330 daN, and a lashing capacity (LC) of 1,500 daN in straight pull. For trucks, the requirements are even higher: here, the webbing must be at least 50 millimeters wide, with an LC of 2,500 daN and an STF of 500 daN. In both cases, strap elongation must not exceed 4%, ensuring vehicles remain reliably secured even under heavy loads.

The advantages of the controller are particularly clear in daily use. Thanks to its special design, the strap no longer slips and rests securely on the tire. The integrated joint ensures optimal force alignment, allowing the applied pre-tensioning force to be distributed evenly. This reduces stress on the tires, the strap, and the vehicle floor while increasing the service life of all components. Handling is also extremely user-friendly: the flat, compact design makes application especially easy, while the straps can be stored in a space-saving way. Another practical benefit is that the low strap elongation minimizes the need for re-tensioning.

In practice, this means that with a Lasiprofi car transport strap according to DIN EN 12195-2 and equipped with a controller system, you can secure every vehicle not only in compliance with standards but also in a time-saving and material-friendly way. The systems are designed to remain dimensionally stable even with frequent use, ensuring outstanding durability. Certification in accordance with VDI 2700 and compliance with the ETA value of at least 0.5 guarantee full legal certainty while also meeting the requirements of vehicle manufacturers and inspection authorities.

A Lasiprofi car transport strap with controller is therefore the ideal solution for logistics companies, car transporters, and workshops that need to transport vehicles professionally and safely. It combines maximum safety with simple handling and saves valuable time during lashing.